Original Xhorse V4.7.8 VVDI2 Commander Car Key Programmer Full Version for VW/Audi/BMW/Porsche/PSA / AUDI

Top 7 Reasons to Get VVDI2:

1. This VVDI2 Full Package Contains Basic Function +For VW +For BMW + For Porsche+For PSA + For AUDI Generation 5 Function + For BMW OBD Fucntion + For BMW CAS4 Functions + For Tango + For J2534

2. VVDI2 Full Package Covers All the Functions of VVDI, VVDI 5th IMMO Adapter, For BMW Multi Tool & CAS Plus for BMW Multi Tool

3. Support For VW, For Audi, For BMW, For Porsche & For PSA

4. Update Online Free Lifetime

5. Latest Version: V5.2.5 VVDI2 V5.2.5 Software Free Download (You can contact us to get the link when you get the package)

6. Newly Add For BMW FEM/BDC and Prepare Dealer Key by ECU Data Function (You can contact us to pay to open the function)

7. If you have iKeycutter CONDOR XC-MINI, we can open the authorization to read pin, cs, mac.

VVDI2 - for BMW FEM/BDC system (function released and available, just no user manual)

Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)

1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)

2.support reset FEM/BDC KM(cluster require reset manually)

3.support erase key(after erase the key position become blank position)

4.support backup coding

5.support restore coding

Notes:

1.backup coding and restore coding can direct operation generally.

2.add keys, reset KM, erase key must programming FEM/BDC system first.

3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "for BMW E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-for BMW.

4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.

5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.

6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car

or the car with window problem)please use "for BMW E-sys software" coding for FEM/BDC system

7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.

Contact information:

Name: Lisa

Whatsapp: 86-13975180177

Skype: gsliuxiaxia